Answers to frequently asked questions about the system, its applications, and the ecosystem MagFace®
MagFace® It is a patented dry magnetic installation system for architectural surfaces, designed to install, remove and reuse surfaces without demolition.
The system creates a controlled magnetic interaction between the laying layer and the magnetic surface, ensuring stability and reversibility.
Yes. MagFace® is a completely dry system that does not use any permanent structural adhesives.
MagFace® introduces an alternative to the traditional pose: a Magnetic Surface System dry which allows installation, removal and replacement without demolition.
No. MagFace® is certified and complies with Directive 2013/35/EU. It is safe for sensitive individuals, children, pregnant women and people with pacemakers.
The static magnetic fields of the system are controlled and the reference values reported in the technical documentation are up to approximately 0.2 mT.
No. The system uses a North/South magnetic grating array that self-compensates every millimeter, avoiding any buildup or amplification.
No. Smartphones and computers generate dynamic fields and active emissions significantly higher than those of MagFace® system
Yes. It is compatible with pacemakers and medical devices under normal use conditions.
The four compatible laying layers are: MagFlexMat® , MagMixture® Paint, MagMixture® Plaster and MagFlexPro®.
It is a dry insulating technical base for quick installation, compensation for irregularities and reversible installations.
It is a high-performance base with thermal and acoustic insulation and greater compensation capacity.
It is a water-based wall covering containing iron microparticles that creates magnetically active surfaces on walls.
It is a technical ferrous mortar for leveling, restoring and preparing horizontal and vertical surfaces.
It is the final layer of the system available in ALL SOLUTION (total) and ONLY FLOOR (floors only) versions.
MagFiller® it is the elastic technical sealant of the system MagFace® , used for joints, gaps and technical connections.
It is a technical perimeter system that replaces traditional edges and seals.
Yes. It is designed exclusively as a dry system.
Substrate preparation depends on the system used. MagMixture® Plaster can compensate for unevenness of up to 5 mm; MagFlexPro® up to 10 mm.
The substrate must be prepared until it meets the required flatness, level, and squareness requirements. If any discrepancies are found, technical smoothing or leveling systems are used.
Yes. It is designed for large formats in stoneware, stone and sintered materials.
Yes. The system is compatible with different surface thicknesses; compatibility must be verified based on the material, format, and system configuration.
Yes. It supports natural stone up to approximately 30 mm thick.
Yes. Vertical installation is certified and structurally stable.
Yes. They can be removed and reinstalled without demolition.
Yes. The system allows full access to technical facilities.
The system has been performance tested according to ASTM C627-10. The technical documentation and certifications provide complete results.
Up to 110 kg/m² in the vertical slip test with MagFlexMat®
Yes. MagFace® It has technical documentation and certifications related to safety, performance, and applications. The complete documentation is available in the Certifications section.
The preparation of the substrates must comply with the applicable requirements of UNI 11493. For the technical installation and support requirements, refer to the documentation MagFace® .
Yes. It is designed for humid environments and wellness.
Yes. With dedicated technical sealing systems.
Yes. For vertical and technical surfaces.
Yes. For kitchen tops and horizontal technical surfaces.
Yes. Without demolition or damage to the support.
Yes. For high traffic and intensive use environments.
Yes. For environments with high levels of hygiene and health control.
Yes. It reduces demolition, waste, and material consumption.
MagFace® It is designed to support circular economy principles, reduce demolition, and reuse land. For technical data and indicators, see the ESG documentation .
No. It is completely VOC-free.
No. It is free of toxic, carcinogenic or mutagenic substances.
No. The dry structure reduces these phenomena.
Yes. It is suitable for high air quality (IAQ) environments.
It is an industrial technology platform for removable surfaces.
Yes. For professional applications, technical training is provided through the MagFace Academy®, with dedicated courses and qualifications.
MagFace Academy® is the technical training and qualification program dedicated to system operators MagFace® .
The professional use of MagFace® It occurs through qualified courses, training and, for specific commercial or industrial activities, licensing programs.
Yes. MagFace® It has been used and validated in real-world applications and projects. Discover MagFace® applications and projects.
Yes. MagFace® It is designed as an industrial technology that can be integrated into surface production processes.
Yes. MagFace® It is a patented technology protected by intellectual property rights. For information on the licensing program, see the dedicated section .
Explore technical requirements, applications, and system integration with the support of our team.
